Radio Design Labs RDL ST-DA3 Audio Distribution Amplifier

Radio Design Labs ST-DA3

*NEW IN BOX!*
Includes instructions & adhesive velcro for mounting
Manufacturer Product Page
- Audio Distribution with up to 3 Outputs
- Balanced or Unbalanced Input and Outputs
- Bridge an Audio Line for Local Distribution
- Distribution with Impedance Conversion
- Distribution with Gain or Loss
- Inputs and Outputs RF-Protected
- 1x3 Mono or Use Two Units for Stereo
- RDL® SupplyFlex™ Power Input Configuration
The ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving either high or low impedance, balanced or unbalanced loads. The ST-DA3's wideband circuitry produces the unsurpassed pure clarity, ultra-low distortion and low noise for which RDL products are known.
Features:
- Functions as an electronic transformer
- Provides isolation, gain, and three outputs
- Wideband amplifiers produce impeccable audio
- Operates from ground-referenced, floating or bipolar power supply
- Ultra-low distortion
- Ultra-low noise
- Excellent phase response
- Gain adjustment 17 dB above or below unity
- Ample headroom at operating level
- Recessed multi-turn audio taper gain trimmer for precise control
- Input and outputs are RF protected
- Full operation in either high or low impedance circuits
- Outputs are short circuit protected
- Positive connections via barrier block
Specifications:
- Input: 20 kohm balanced or unbalanced
- Input Signal: -15 dBV to +21 dBu (for +4 dBu output)
- Maximum Input Level: +24 dBu
- Outputs (3): 150 ohm balanced or 75 ohm unbalanced
- Output Signal:
* Balanced: +4 dBu nominal balanced
* Unbalanced: 6 dB below balanced line level - Maximum Output Level: +25 dBu
- Frequency Response: 10 Hz to 100 kHz (+/- 0.05 dB)
- THD+N:< 0.002% (unity gain)
- IMD:< 0.003% (unity gain)
- Noise below +4 dBu:< -98 dB (unity gain)
- Headroom:> 20 dB (above +4 dBu)
- Gain: Unity +/- 17 dB (adjustable)
- CMRR:> 60 dB (50 Hz to 120 Hz)
- Power Requirement: Ground-Referenced or Floating 24 to 33 Vdc @ 70 mA
ALSO FOR SALE:
More great gear...





